Midwest Cover Crops Council (MCCC-121)
Iowa State University Extension (CROP 3165)
This publication is intended to provide a starting point for farmers who are new to growing cover crops. With experience, farmers may fine-tune the use of cover crops for their systems.
Introduction
The following recipe provides an introductory approach for planting a cover crop after corn silage harvest and then planting corn for grain or silage as the next crop. The early harvest of corn silage provides an extended planting window for establishing a cereal rye cover crop.
Planning and Preparation
- Planning—Read about cover crops. Go to field days. Start small. Be timely. Prioritize management based on purpose and objectives. Arrange for equipment, custom operators, or additional labor as needed.
- Corn hybrid and planting—If possible, plant the preceding corn silage crop early, and use a hybrid within the adapted maturity range for your location.
- Residual corn herbicides—Cereal rye can be planted in the fall and produce a successful stand following most spring-applied residual corn herbicides. If cereal rye is to be grazed or harvested for forage, there are some time-interval restrictions. (See Herbicide Use May Restrict Grazing Options for Cover Crops -Resources.)
- Seed purchase—Pre-order cereal rye seed in early summer. Named rye varieties can produce substantially more growth and have predictable development, but they are usually more expensive than variety not stated (VNS) seed. Use good quality seed that has been cleaned, tested for germination and weed seed contamination, and purchased from a reputable seed dealer.
Fall Work
- Corn silage harvest—Prioritize harvest of fields where cereal rye is to be planted.
- Tillage or no-tillage—Generally, it is easier to integrate cover crops into no-till or strip-till systems. If tillage is necessary to incorporate manure, fertilizer, or lime, or to smooth the seed bed after corn silage harvest, it should take place prior to rye seeding.
- Timing of planting—Ideally, plant cereal rye as soon as possible after silage harvest. Plant no later than the following dates: October 21 in northern Iowa, October 28 in central Iowa, and November 7 in southern Iowa.
- Seeding rate—Use 55 lbs./acre for drilled seed and 60 lbs./acre for shallow incorporation. Seed should have a germination rate greater than 85%.
- Planting method—Drill to a depth of 0.75–1.50 inches or broadcast with shallow incorporation to 1.50 inches.
- Manure, P, K, or lime—For best rye establishment, any manure, P, K, or lime should be injected, subsurface banded, or surface applied and incorporated before planting the cover crop. Manure can also be injected with a low-disturbance applicator after the rye cover crop is at least 4 inches tall, but significant damage to the cover crop may occur. Surface-applying granular P, K, or lime before the ground completely freezes can be done with minimal cover crop damage if the soil is not too wet.
Spring Work
- Termination timing—Terminate the cereal rye in spring when plants are 6 to 12 inches tall and actively growing or at least 10 days before planting corn—whichever comes first. Check current crop insurance rules regarding timing of termination of cover crops. (See NRCS Cover Crop Termination Guidelines -Resources.)
- Termination herbicide—Cereal rye can typically be terminated with a full rate of glyphosate (1 lb. acid equivalent/acre) after the rye begins growing in the spring. Use best management practices for glyphosate to improve effectiveness. Glyphosate will kill rye more quickly if the rye is rapidly growing and temperatures are greater than 55°F during the day and greater than 40°F at night. Rye sprayed during cooler weather can be more difficult to kill, may require higher glyphosate rates, or will die more slowly.
- Termination modifications for wet weather—In a wet or windy spring, be ready to take advantage of any break in the weather and/or use low axle weight sprayers.
- Option to harvest cereal rye as a silage crop—A rye cover crop planted in the fall and harvested at boot stage can provide a substantial amount of good quality forage. However, waiting for cereal rye to reach the boot stage (mid-May to early June) will delay planting of the next corn crop and may decrease its yield. If the following corn crop will be insured, then rye should be terminated and corn planted before the crop insurance late-planting deadline. (See Resources.)
- Corn planting—Almost all modern row planters are fully capable of planting corn into a dead cereal rye cover crop. Row cleaner attachments can sometimes be beneficial to increase soil warming, but setting them too deep can cause problems. Planter adjustments are usually needed to ensure correct planting depth and seed furrow closure.
- Starter fertilizer—Consider equipping your corn planter with a 2×2 starter fertilizer applicator and aim for a starter fertilizer rate between 30–50 pounds of actual N per acre.
- Scouting after planting—Scout for corn emergence, population, and insect pests. Additionally, scout for weeds because substantial cereal rye residue can often delay emergence of annual weeds, which may then delay the application of post-emergence herbicides.
Resources
Cover Crop Selector Tool —available from Midwest Cover Crops Council
Effect of residual herbicides on cover crop establishment (Iowa State Extension and Outreach Integrated Crop Management Encyclopedia Article)
Herbicide Use May Restrict Grazing Options for Cover Crops (Iowa State Extension and Outreach publication CROP 3082, revised January 2017)
NRCS Cover Crop Termination Guidelines (version 4, June 2019)—available from the USDA Natural Resources Conservation Service
Planting Winter Rye after Corn Silage: Managing for Forage, J. Stute, K. Shelley, D. Mueller, and T. Wood. 2009.
Cover Crop Management (Iowa Agronomy Technical Note 38)—available from the USDA Natural Resources Conservation Service
Post Soybean, Going to Corn: Use Oats (Iowa Cover Crop Recipe series, MCCC-104)
Post Corn, Going to Soybean: Use Cereal Rye (Iowa Cover Crop Recipe series, MCCC-103)
Authors
Tom Kaspar, USDA-ARS (retired); and Mark Licht, Iowa State University (Note: This publication was adapted with consent from MCCC under a joint project to produce customized introductory guidance about cover crops for all member states/provinces.)
Reviewers and Contributors
Stefan Gailans, Practical Farmers of Iowa; Michael Henderson and Kevin Kuhn, USDA-NRCS; Eileen Kladivko, Purdue University; Keith Kohler, USDA-ARS; Anna Morrow, Midwest Cover Crops Council; and Matt Ruark, Kevin Shelley, and Dan Smith, University of Wisconsin-Madison
Acknowledgments
This publication was developed with contributions and collaboration from Iowa Learning Farms and Practical Farmers of Iowa.
The Midwest Cover Crops Council (www.https://www.midwestcovercrops.org) aims to facilitate widespread adoption of cover crops throughout the Midwest by providing educational/outreach resources and programs, conducting new research, and communicating about cover crops to the public.
Funding for this project was provided by McKnight Foundation.
March 2020
The U.S. Department of Agriculture (USDA) prohibits discrimination in all its programs and activities on the basis of race, color, national origin, age, disability, and where applicable, sex, marital status, familial status, parental status, religion, sexual orientation, genetic information, political beliefs, reprisal, or because all or a part of an individual’s income is derived from any public assistance program. (Not all prohibited bases apply to all programs.) Persons with disabilities who require alternative means for communication of program information (Braille, large print, audiotape, etc.) should contact USDA’s TARGET Center at (202) 720-2600 (voice and TDD). To file a complaint of discrimination write to USDA, Director, Office of Civil Rights, 1400 Independence Avenue, S.W., Washington, D.C. 20250-9410 or call (800) 795-3272 (voice) or (202) 720-6382 (TDD). USDA is an equal opportunity provider and employer. ©2020 by MCCC. All rights reserved.